DIY Hunting Rifle Target Downloads

Here are some targets I like to use to sight in my rifles. For my deer and elk rifle loads I like to sight my rifles in at 2 1/2 inches high at 100 yards. This is a little higher than the traditional 2 inches that you have always been told to do.

With the ballistics that are achieved with the 243 WSSM and my 270 WSM I get roughly a 350 yard max-point-blank range on a 7 inch target. What does this mean? It means that I can hold dead center on a 7 inch diameter target and be able to hit that target from 0 to 350 yards. So from 0 to 400 yards I can hold on an elk or deer with no hold over required. Now, I do hold on the lower part of the shoulders for basically a heart shot when I am in the 100-200 yard range and I hold for a high shoulder shot in the 400 yard range.

Now when I am shooting the 55g Ballistic Tips over the 4,000 fps barrier I like being sighted in for 1 1/2 inches high at 100 yards. This gives me a nice 300 yard zero. Perfect for taking the smaller Prairie Dogs, Coyotes, Rock Chucks and the like out to around 350 yards without any drastic hold over or under.

Shooting with Adjustable Target Turrets
In 2013 I started getting Vortex Viper rifle scopes with target style elevation turrets. With these scopes I like to sight the rifle in to be dead on at 100 yards and then dial in the minutes of angle for the specific shot with the target style turret.

If you click on the images below you will download PDF files that you can print out. The grid pattern on the targets are a half inch apart. When printing make sure you do the following to get the proper sizing of the targets. When you select print in Adobe Acrobat select the "NONE" option in the "Page Scaling" menu. If left on the default option which is "Shrink to Printable Area" your target will be reduced in size making the half inch grid somewhat smaller.

Varmint Sight In Target
1 1/2" Sight-in Height
Traditional Hunting Sight In Target Height
2" Sight-in Height
Two and a half inch target sight in height
2 1/2" Sight-in Height
Four Up Sight-In Target
Four Up Dead On Sight-in
Muzzleloader Sight-In Target
Muzzleloader Target (10 inch outside diameter circle, 11x17 paper required)

 

Additional information