X-Bolt Hell's Canyon Speed Rifle — Setup Lightweight and Long Range Ready

Lightweight Hunting Rifle - X-Bolt Hell's Canyon Speed 300 WSM

I often get asked what my favorite scopes are for my rifles. For my long range hunting rifles, my favorite scope has been the Vortex Optics HS-LR 4-16x50 with the generous 24 MOA per rotation elevation turret and a capped windage turret. In my 28 Nosler X-Bolt I can dial up shots waaaaay out there with this combination. So why did I break from Vortex and go with this Leupold scope for my Browning Hell's Canyon Speed X-Bolt?

I wanted to keep this rifle really lightweight. To do so I needed a short windage cap to make sure that the fat WSM shells cleared the turret on ejection. I also wanted to have the ability to dial up most of my shots and have a capped windage turret.  So here is my solution. I have went with a 4.5-14x40 VX-3i with 30mm tube (had to get 30mm tube to get an adjustable objective) and I had the Leupold custom shop place an Impact 32 MOA reticle in it. 

I really like the setup for keeping my rifle lightweight. If I had a Vortex, Nikon, Burris and many other brands of scopes I would have to put the scope up on a rail or use really high rings. With a scope up so high I would then have to build comb height adjustment into the buttstock.

What I have now is a lightweight long range hunting rifle that shoots Hornady 200 Gr ELD-X bullets sub 1/2 MOA. I have an awesome tree of 32 MOA of holdovers in the reticle, I can dial up 14 MOA on the turret (700+ yards) and I have a sticker on the top of the turret marked with yardages to dial set currently at 6,500 ft of elevation. I can always place another sticker on the cap and mark it for a different elevation and bullet combo.

This rifle as shown with a full magazine and a Clincher sling has a total carry weight of 8 lbs 1 oz.

 

 

Additional information